MOXA ioLOGIK ETHERNET I/O SERVER
Forsiden
MOXA ioLOGIK ETHERNET I/O SERVER
Produktet kan p.t. ikke leveres, og er muligvis udgået. Kontakt os venligst for hjælp til at finde et tilsvarende produkt.
|
MOXA ioLOGIK ETHERNET I/O SERVER
-
Produkt
Ethernet
-
Porte
2
-
Hastighed
100Mbps
|
ioLogik E1214
Ethernet Remote I/O with 2-port Ethernet switch, 6 DIs, and 6 Relays
- Built-in 2-port Ethernet switch for daisy-chain topologies
- Free support of Moxa’s push-based Active OPC Server Lite
- - Seamlessly connect to any SCADA system
- - Save 80% on network bandwidth
- - I/O response that’s seven times faster
- User-defined Modbus/TCP addressing
- I/O peer-to-peer function
- MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs
- Web configuration with Import/Export function
A new daisy-chained Ethernet I/O concept is now available. The ioLogik E1214 industrial Ethernet remote I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the Ethernet remote I/O ioLogik E1214 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.
• Inputs and Outputs |
Digital Inputs |
6 channels |
Relay Outputs |
6 channels |
• Digital Input |
Sensor Type |
Wet Contact (NPN or PNP), Dry Contact |
I/O Mode |
DI or Event Counter |
Dry Contact |
• On: short to GND
• Off: open |
Wet Contact |
• On: 0 to 3 VDC
• Off: 10 to 30 VDC |
Isolation |
3K VDC or 2K Vrms |
Counter Frequency |
250 Hz, power off storage |
• Relay Output |
Type |
Form A (N.O.) relay outputs, 5A |
Contact Rating |
5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC |
Inductance Load |
2 A |
Resistance Load |
5 A |
Breakdown Voltage |
500 VAC |
Relay On/Off Time |
1500 ms (Max.) |
Initial Insulation Resistance |
1G min. @ 500 VDC |
Expected Life |
100,000 times (Typical) |
Initial Contact Resistance |
30 milli-ohms (Max.) |
Pulse Output |
0.3 Hz at rated load |
• LAN |
Ethernet |
2 x 10/100 Mbps switch ports, RJ45 |
Protection |
1.5 KV magnetic isolation |
Protocols |
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP |
• Power Requirements |
Power Input |
24 VDC nominal, 12 to 36 VDC |
Power Consumption |
188 mA @ 24 VDC |
• Physical Characteristics |
Wiring |
I/O cable max. 14 AWG |
Dimensions |
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in) |
Weight |
under 200 g |
• Environmental Limits |
Operating Temperature |
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
• Standards and Certifications |
Safety |
UL 508 |
EMI |
FCC Part 15 Subpart B Class A |
EMS |
IEC 61000-4, IEC 61000-6 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
• MTBF (mean time between failures) |
Time |
808,744 hrs |
Database |
Telcordia (Bellcore) |
• Warranty |
Warranty Period |
2 years |
Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.