Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

EXTRON XPA 2001 Mono 70/100 V Amplifier - 200 Watt

Forsiden EXTRON XPA 2001 Mono 70/100 V Amplifier - 200 Watt
Produktet kan p.t. ikke leveres, og er muligvis udgået. Kontakt os venligst for hjælp til at finde et tilsvarende produkt.
EXTRON XPA 2001 Mono 70/100 V Amplifier - 200 Watt (60-850-11)

EXTRON XPA 2001 Mono 70/100 V Amplifier - 200 Watt

Varenr.:
60-850-11
  • Type Forstærker
Beskrivelse

XPA 2001


Mono 70/100 V Amplifier - 200 Watts

The Extron XTRA™ Series XPA 2001 is a half rack 1U, convection cooled power amplifier delivering 200 watts into a 70 volt or 100 volt line. This professional grade amplifier features a 100 dB signal-to-noise ratio with less than 0.1% THD+N. The XPA 2001 is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 2001 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.

Energy Efficient Amplifier with Auto Power-Down

The XPA 2001 ENERGY STAR qualified amplifier is an energy efficient product that conserves energy and reduces costs. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 10 watts when idle and less than 1 watt in standby mode.
The XPA 2001 is housed in a compact 1U, half rack width enclosure. This amplifier is UL 2043 plenum rated when used with the optional Flexible Conduit Adapter Kit, allowing for a concealed installation above a drop ceiling to prevent theft while providing convenient placement of AV equipment.
The XPA 2001 delivers 200 watts rms for high impedance speaker systems in voice reinforcement and distributed audio applications. The XPA 2001 is available in 70 volt and 100 volt models.
The XPA 2001 accepts balanced and unbalanced input signals and includes recessed, detented level controls located on the rear panel to prevent tampering. These controls allow for adjusting audio system gain structure, or setting individual levels for each zone. For applications requiring volume adjustment and muting control from a location other than the amplifier, remote control capability is available using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller. Additionally, the XPA 2001 includes multiple protection circuits that momentarily activate when an abnormal condition, such as overheating, is detected. An advanced, automatic clip limiter protects speakers from clipping distortion.

Features

  • Inputs: Balanced or unbalanced stereo or mono on a 3.5 mm, 5-pole captive screw connector
  • Speaker Outputs: Screw-lock, 5 mm, 2-pole captive screw connector
  • 200 watts rms output power:
  • XPA 2001-70V - 1 x 200 watts @ 70 volts
  • XPA 2001-100V - 1 x 200 watts @ 100 volts — The XPA 2001 provides ample power output for larger rooms.
  • ENERGY STAR® qualified amplifier — The XPA 2001 is an ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs.
  • Professional grade signal-to-noise and THD+N performance — The XPA 2001 delivers professional grade performance with 100 dB signal-to-noise ratio and THD+N of less than 0.1%.
  • Extron Patented CDRS™ - Class D Ripple Suppression — CDRS is an Extron Patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
  • Convection cooled, fanless operation — The XPA 2001 does not require internal fans or vents for cooling, ensuring quiet, reliable operation. It generates substantially less heat than conventional power amplifiers, making it ideal for rack-mount applications.
  • Ultra low inrush current - no need for power sequencing — Allows multiple XTRA Series amplifiers to be powered on simultaneously without overloading power circuits. This eliminates the need for power sequencing.
  • Power factor correction - removes harmonic content on AC line — The XPA 2001 features power factor correction technology that smoothes out the high peak currents of the amplifier’s current draw, thus minimizing the presence of high frequency harmonics on the AC power line, and therefore preventing audible artifacts from being transmitted to other audio equipment in the system.
  • Rack-mountable 1U, half rack width enclosure — The XPA 2001 reduces rack space requirements for many installations.
  • UL 2043 plenum rated when used with optional Flexible Conduit Adapter Kit — The XPA 2001 meets UL 2043 for smoke and heat release for installation within a plenum airspace above a drop ceiling when used with the optional Flexible Conduit Adapter Kit, part # 70-228-02. Above-the-ceiling placement conceals the amplifier to prevent theft, and is convenient for installing equipment when space inside the room is limited.
  • Auto power-down with fast power-up — The XPA 2001 meets ENERGY STAR qualification requirements with an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, dramatically reducing power consumption. It quickly returns to full power status in less than one second upon signal detection.
  • Rear panel recessed, detented level control — Provides attenuation of input signals for adjusting audio system gain staging. It is located on the rear panel to prevent users from tampering with level adjustments.
  • Automatic clip limiter — Detects actual onset of clipping by comparing input and output waveforms. Gain is automatically reduced without audible artifacts to protect speakers from clipping distortion.
  • Multiple protection circuits — Activate during output shorts, thermal overload, or DC faults to prevent damage to the amplifier and speakers.
  • Remote standby port — Enables the XPA 2001 to be remotely powered down when not in use, reducing operating cost.
  • Remote volume and mute control port — In basic installations without control systems, this port allows the XPA 2001 to be remotely controlled using the optional Extron VCM 100 or VCM 200 analog volume and mute controller or VC 50 analog volume controller.
  • Input summing — Actively sums incoming left and right channel signals for mono amplification.
  • High pass filter — This switch selectable filter rolls off frequencies below 80 Hz to prevent saturation of speaker transformers.
  • 5 mm screw-lock captive screw speaker connectors — Enable simple, secure connections with 22 to 12 AWG speaker cables.
  • Front and rear-mounted signal and protection indication LEDs — Provide convenient indication of input signal presence and protection circuit activation from both sides of an equipment rack.
  • Front panel over-temperature LED — Provides visual indication that the enclosure temperature has exceeded the optimal value, well in advance of the onset of thermal protection circuitry.
  • Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

XPA 2001 Series
Audio
   Voltage gain 
      XPA 2001-70V 57x (35 dB)
      XPA 2001-100V 81x (38 dB)
   Stereo channel separation >75 dB @ 1 kHz
   CMRR 75 dB @ 1 kHz (typical)
Audio input
   Number/signal type 1 stereo or 2 mono, balanced/unbalanced
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Impedance >10k ohms unbalanced/balanced, DC coupled
   Nominal level +4 dBu (1.23 Vrms), balanced
   Maximum level +20 dBu (7.75 Vrms), balanced
   Input sensitivity +4 dBu (1.23 Vrms) if driven by one input
-2 dBu (0.615 Vrms) if both inputs are summed
   Input signal detection threshold -40 dBu ±3 dB, balanced
Audio output
   Number/signal type 
      XPA 2001-70V 1 mono, 70 V line
      XPA 2001-100V 1 mono, 100 V line
   Connectors (1) 5 mm screw lock captive screw connector, 2 pole
   Load impedance
      XPA 2001-70V 25 ohms minimum
      XPA 2001-100V 50 ohms minimum
   Amplifier type Class D
   Output power
      XPA 2001-70V 200 watts rms, 70 V, 1 kHz, <0.1% THD
      XPA 2001-100V 200 watts rms, 100 V, 1 kHz, <0.1% THD
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise <0.1% @ 1 kHz at 3 dB below clipping
   S/N 100 dB, 20 Hz - 20 kHz, unweighted
   Damping factor 
      XPA 2001-70V >100 @ 25 ohms
      XPA 2001-100V >100 @ 50 ohms
   High pass filter 80 Hz, 12 dB per octave rolloff (switch selectable)
Control/remote — amplifier
   Control port (1) 3.5 mm captive screw connector, 5 pole
   Pin configurations 
      DC volume control (analog) Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND
      Volume control voltage range 0 V (mute) to 10 V (maximum volume)
      Standby power control (contact closure) Pin 4 = GND, pin 5 = standby
General
   Power supply Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption 
      Typical (1/8 power) 
         XPA 2001-70V 70 V (x1): 45 watts
         XPA 2001-100V 100 V (x1): 45 watts
      Quiescent 12 watts
      Standby <1 watt (triggered by contact closure or after 25 minutes [± 5 minutes] with no signal)
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents, with internal heat sinks
   Thermal dissipation 
      Standby <1 watt (3 BTU/hr)
      Idle 12 watts (41 BTU/hr)
      1/8 power (pink noise) 
         XPA 2001-70V 70 V (x1): 21 watts (71 BTU/hr)
         XPA 2001-100V 100 V (x1): 20 watts (69 BTU/hr)
   Protection Clip limiting, thermal, short circuit, DC output
   Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
   Mounting 
      Rack mount Yes, with optional 1U rack shelf
   Enclosure type Metal
   Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
   Product weight 2.5 lbs (1.1 kg)
   Shipping weight 5 lbs (3 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release; meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
      EMI/EMC CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, KCC, VCCI Class B
      Environmental Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
   Warranty 3 years parts and labor

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.