Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

EXTRON 60-506-03

Forsiden EXTRON 60-506-03
Produktet kan p.t. ikke leveres, og er muligvis udgået. Kontakt os venligst for hjælp til at finde et tilsvarende produkt.
EXTRON 60-506-03 (60-506-03)

EXTRON 60-506-03

Varenr.:
60-506-03
  • Type Forstærker
Beskrivelse

P/2 DA2xi


Two Output VGA Distribution Amplifier

  Model Version Description Part #      
P/2 DA2xi   1x2 VGA-QXGA   60-506-03    

The Extron P/2 DA2xi and P/2 DA2xi MT are one input, two output, VGA distribution amplifiers. Both models come in smaller-sized and durable metal enclosures that can be easily installed in small, tight places. They're small and portable enough to fit into a briefcase for presenters on-the-go. Each model offers 350 MHz (-3dB) of RGB video bandwidth, and are compatible with VGA-QXGA graphic cards, projectors and flat panel displays. Adjustable gain and peaking are DIP switch-selectable.

The P/2 DA2xi MT also includes stereo audio, and features a 3.5 mm female jack for audio input and a captive screw connector for balanced or unbalanced stereo output. The P/2 DA2xi includes a detachable, high performance, Extron six foot male to male VGA cable, while the P/2 DA2xi MT includes a detachable six foot male to male VGA with audio cable.

Because the P/2 DA2xi and P/2 DA2xi MT are housed in quarter rack width metal enclosures, there are a number of versatile mounting options available to suit virtually any application or environment. With an optional Rack Shelf Kit, either model can be rack-mounted alone or with three other quarter rack width A/V products.

There are also optional mounting kits available so the P/2 DA2xi and P/2 DA2xi MT can be mounted under a desk or next to a projector.

Features

  • Input: One female 15-pin HD connector
  • Outputs: Two female 15-pin HD connectors
  • 350 MHz (-3 dB) RGB bandwidth, fully loaded
  • Compatible with VGA-QXGA resolutions
  • Gain and peaking controls
  • DIP-switch selectable input and output sync impedance
  • Power and source signal indicator
  • Includes detachable 6' (2 m) male-to-male VGA input cable
  • ID bits routed to local monitor output
  • Rack-mountable or portable
  • External universal power supply included, replacement part # 70-775-01

Specifications

P/2 DA2xi, P/2 DA2xi MT
Video
   Gain 
      P/2 DA2xi  Output: 0 dB or 0.4 dB, selectable
Local monitor output: unity
      P/2 DA2xi MT  Output: 0 dB or 0.6 dB, selectable
Local monitor output: unity
   Peaking 
      P/2 DA2xi  Output: selectable, 0.7 dB or 1.4 dB at 100 MHz
Local monitor output: fixed
      P/2 DA2xi MT  Output: selectable, 0 dB or 0.6 dB at 100 MHz
Local monitor output: fixed
   Bandwidth  350 MHz (-3 dB)
Video input
   Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video
   Connectors  1 female 15-pin HD
   Pin connections  ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through).
Pin 9 is floating.
   Nominal level  1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
   Impedance  75 ohms
   Horizontal frequency  15 kHz to 135 kHz
   Vertical frequency  30 Hz to 170 Hz
   Return loss  <-38 dB @ 5 MHz
   DC offset (max. allowable)  1.0 V
   Input coupling  DC
Video output
   Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video (follows input type)
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (ID bits are passed through.)
   Connectors  2 female 15-pin HD
   Nominal level  1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain
   Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p (follows input)
   Impedance  75 ohms
   Return loss  <-40 dB @ 5 MHz
   DC offset  ±5 mV with input at 0 offset
Sync
   Input type  RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Output type  RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Output type  RGBHV, RGBS, RGsB, RsGsBs
   Input level  1.5 V to 5.0 Vp-p
   Output level  TTL, 5 Vp-p, unterminated
   Input impedance 
      P/2 DA2xi  <1k ohm (default) or 10k ohms, selectable
      P/2 DA2xi MT  510 ohms (fixed)
   Output impedance  75 ohms (default) or 50 ohms, selectable
   Max. propagation delay  60 ns
   Max. rise/fall time  4 ns
   Polarity  Positive or negative (follows input)
Audio  — P/2 DA2xi MT only
   Gain  Unbalanced output: 0 dB; balanced output: +6 dB
   Frequency response  20 Hz to 20 kHz, +0.05 dB, -0.1 dB
   THD + Noise  0.03% @ 1 kHz at nominal level
   S/N  >90 dB (balanced) at maximum output
   Crosstalk  <-80 dB @ 1 kHz, fully loaded
   Stereo channel separation  >80 dB @ 1 kHz, >60 dB @ 20 kHz
   CMRR  >67 dB @ 20 Hz to 20 kHz
Audio input  — P/2 DA2xi MT only
   Number/signal type  1 stereo, unbalanced
   Connector  (1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND)
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Nominal level  -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output
   Maximum level  >+10 dBV (3.16 V) (unbalanced) at 1%THD+N
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output  — P/2 DA2xi MT only
   Number/signal type  1 stereo, balanced/unbalanced
   Connectors  (1) 3.5 mm captive screw connector, 5 pole
   Impedance  50 ohms unbalanced, 100 ohms balanced
   Gain error  ±0.1 dB channel to channel
   Nominal level  -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output
   Maximum level (Hi-Z)  >+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply
   Maximum level (600 ohm)  >+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply
General
   External power supply  100 VAC to 240 VAC, 50-60 Hz, 4.5 watts, external; to 12 VDC, 1 A, regulated
   Power input requirements  12 VDC, 0.2 A
   Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling  Convection, no vents
   Mounting 
      Rack mount  Yes, with optional 1U rack shelf
      Furniture mount 
         P/2 DA2xi  Yes, with optional under-desk mounting kit
         P/2 DA2xi MT  Yes, with included under-desk mount kit or optional through-desk mount kit
      Pole mount  Yes, with optional pole mount kit
   Enclosure type  Metal
   Enclosure dimensions  1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
   Product weight  0.5 lbs (0.3 kg)
   Shipping weight  3 lbs (2 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety  CE, c-UL, UL
      EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
   MTBF  30,000 hours
   Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.